跳转到正文
中文

QIANGDELI / PAGE

How to Integrate Joint Modules into Multi-Axis Robotic Motion

Define the Role of Each Robotic Axis

A joint module brings rotary actuation, support, and mechanical connection into a compact unit. In a multi-axis system, however, its performance depends on how it is used within the complete kinematic chain. Each axis carries different loads, moves through a different range, and requires a different combination of speed, torque, stiffness, and positioning control.

Start by listing every joint in the machine or robot: base rotation, shoulder, elbow, wrist, tool rotation, and any auxiliary axis. Define the direction, range, maximum speed, acceleration, and expected payload for each. Then identify which axes support the main payload and which axes mainly orient the tool. This prevents a module from being selected only by its size and helps balance performance across the system.

QIANGDELI supplies JM joint modules for robotic and automation applications. Because the public product page lists the configuration and technical data as project-dependent, the final module design should be confirmed against the actual motion requirements and mounting arrangement.

Build the Axis Load Model

The load on a joint is more than the workpiece weight. A shoulder or elbow module may carry the remaining arm structure, motor mass, tooling, cables, and payload at a significant distance from the joint center. That creates a moment that changes as the arm moves through its working envelope.

Calculate the static moment in several positions, not just the fully extended position. Include dynamic loads from acceleration and deceleration, process forces, and any shocks produced by the tool. The same payload can create a much higher demand when the arm moves quickly or stops abruptly.

Review bearing support, mounting, and structural stiffness together. A module that is adequate at the output flange may still need a well-designed arm bracket to distribute the load. Avoid using the module to compensate for a flexible frame or an unsupported overhung arm.

Match Motion and Torque Requirements

The required torque must cover the payload moment, acceleration of the arm and tool, friction, and any process force. A robot moving a light object slowly can have a different torque profile from a robot accelerating a larger tool repeatedly. The motion profile should be defined with realistic acceleration and deceleration values.

The module’s reduction ratio affects output speed and torque, as well as the reflected inertia seen by the motor. A higher ratio may improve torque and control resolution, while a lower ratio may support faster movement. The right choice depends on the axis function and the project’s cycle-time target.

Check the continuous and peak operating requirements separately. A short movement may use peak capability, while a joint that holds an arm against gravity for long periods needs a design that can safely support the load. The braking method, motor rating, and duty cycle should be reviewed together.

Select Encoder, Brake, and Control Features

Closed-loop motion requires a suitable position sensor and a controller that can read it reliably. Define the resolution needed at the tool, not only at the motor shaft. The reduction ratio and the distance from the joint to the tool affect how a small angular error becomes a linear positioning error.

For vertical axes or arms that can fall when power is removed, a holding brake may be required. Confirm how the brake is controlled, when it engages, and whether it can hold the expected static load. The brake is not a substitute for mechanical guarding or a risk assessment, but it can help maintain position during shutdown.

The controller should support the selected drive and sensor interface, axis limits, safe stop behavior, and any coordinated motion requirement. If the machine uses a robot controller, confirm that the joint module can be integrated without bypassing the controller’s safety functions. The control architecture should make each axis identifiable and serviceable.

Plan Cable and Tube Routing

Cables and tubes create practical constraints in a multi-axis system. They can limit rotation, apply side loads, or fail after repeated flexing. If the joint module or adjacent structure provides a hollow passage, use it to route power, encoder, sensor, and pneumatic connections through the axis center where appropriate.

Account for the full range of motion, including wrist rotation and tool changes. Confirm minimum bend radii, connector clearance, and service loops, and ensure that cable weight or reaction force is not transferred into the precision output.

Validate Stiffness and Positioning at the Tool

The tool position is the result of the entire chain: base, modules, arm links, gearboxes, brackets, and controller tuning. A module-level positioning specification does not by itself define the final robot accuracy. Validate the assembled axis under representative loads and at positions near the edges of the working envelope.

Measure repeatability at the tool, not only at the joint. Check for backlash, compliance, vibration, and settling time after a move. If the application requires coordinated multi-axis motion, test a representative path and confirm that one axis does not create unacceptable error in another.

Review the Environment and Service Access

Robotic equipment may operate near coolant, chips, dust, heat, or washdown. Confirm the module’s sealing and lubrication requirements for the installed environment. Consider how the joint will be inspected, lubricated if required, and replaced without dismantling adjacent axes.

Provide access to mounting fasteners, electrical connectors, brake controls, and any mechanical limit or reference feature. A compact module can simplify the arm structure, but a service plan is still required. Document the home position, calibration procedure, brake release method, and replacement steps.

Use a Multi-Axis Integration Checklist

Before ordering, define each joint’s load, moment, range, speed, acceleration, duty cycle, required stiffness, encoder resolution, brake requirement, cable routing, environmental protection, and controller interface. Build a kinematic model and verify the worst-case load positions.

QIANGDELI can help match a JM joint module to the machine architecture and discuss the motor, mounting, and integration requirements. Review the QIANGDELI joint module range or send the axis layout, payload, motion profile, tooling envelope, control platform, and environmental conditions to request an engineered configuration and quotation.

CTA: Explore QIANGDELI joint modules or request a joint module quotation.