Skip to content
EN

QIANGDELI / PAGE

How to Select a Hollow Rotary Table for Multi-Station Automation

Start with the Rotary Process

A hollow rotary table is often selected after the fixture and station layout have already been sketched, but the rotary unit influences both. The number of stations, angular spacing, indexing time, fixture size, and available space all affect the best configuration. Starting with the complete process makes it easier to choose a hollow rotary table for multi-station automation that supports the machine rather than constraining it later.

Record the angle between stations, the required positioning tolerance, the time available for each index, and the sequence in which operations occur. Also identify the total rotating mass, the location of the center of gravity, and the forces created by pressing, inspection, dispensing, or other station processes. These values are more useful than selecting a model by diameter alone.

QIANGDELI offers hollow rotary platforms for rotary positioning, indexing, inspection, assembly, dispensing, and other automated motion-control tasks. The final selection depends on the payload, torque, speed, mounting arrangement, drive, and available envelope.

Use the Hollow Bore to Improve Machine Layout

The defining feature of a hollow rotary table is the opening through its center. Cables, pneumatic tubes, vacuum lines, and optical paths can pass through the rotation axis instead of being routed around the outside. This can simplify fixture design and reduce the space needed for a rotating cable carrier.

The bore must be checked against every item that will pass through it. Consider connector size, minimum bend radius, tube stiffness, service loops, and the space needed during installation. The opening should be large enough for maintenance as well as operation. A bore that works on a drawing but cannot accommodate a connector or a replacement hose may cause avoidable redesign work.

The hollow center also affects the mounting interface around the bore. Confirm how the fixture attaches to the rotary disc, where locating features are placed, and whether the workpiece or tooling needs a central opening. For a hollow rotary platform used in vision inspection, the optical path may pass through the center; for an assembly turntable, the fixture may use the opening for wiring and vacuum.

Define the Load and Rigidity Requirement

The rotary table carries both the fixture and the workpiece, and the load is rarely perfectly centered. Calculate the rotating inertia and estimate the torque needed for acceleration and braking. Then review radial load, axial load, and tilting moment caused by an offset fixture or station force.

The QIANGDELI high-precision hollow rotary platform uses a preloaded crossed roller bearing. This arrangement supports multiple load directions and is intended to maintain stable positioning under offset load. The exact capacity still depends on the selected model, so the axial load, radial load, and moment should be confirmed against the final catalog data.

Machining or assembly forces should not be treated as static loads if they create vibration or changing moments. A support brake, external fixture support, or a different station layout may be needed when the process produces high dynamic loads. The rotary table should be part of a complete mechanical review, not an isolated component.

Match Accuracy to the Station Requirement

Positioning accuracy and repeatability describe different parts of rotary performance. Accuracy relates to how closely the commanded angle matches the true angle; repeatability describes how consistently the table returns to the same position. The application may need a tight absolute position, repeatable indexing between stations, or both.

The ASDR Series lists repeatability of ±15 arcsec. This value is a useful starting point for comparing configurations, but the actual station result also depends on the motor and control system, gear ratio, fixture stiffness, payload balance, and the method used to verify position. A vision-inspection station may need a different error budget from a simple transfer turntable.

Define the measurement point as well as the tolerance. A small angular error can become a larger linear error at the tool or inspection camera. The radius from the rotation center should therefore be included when converting the station’s linear tolerance into an angular requirement.

Choose the Ratio and Drive

The ASDR Series offers models from 060 to 450 and reduction ratios of 5, 10, and 18. The ratio affects output speed, torque multiplication, and reflected inertia. A higher ratio can help with torque and controlled indexing, while a lower ratio may preserve faster rotation.

The table can be matched with a servo or stepper motor, depending on the required motion and control method. Review motor torque, inertia, encoder resolution, braking, and the controller’s ability to tune the complete axis. For a servo-driven system, closed-loop control can help the machine monitor position and respond to the programmed motion profile.

Do not choose the motor separately from the table. The flange, shaft, coupling, and mounting arrangement must fit together, and the control system must support the intended acceleration and stopping behavior.

Plan Mounting, Environment, and Service Access

Hollow rotary platforms can be installed horizontally, vertically, or in an overhead orientation when the selected configuration permits it. Confirm the allowable orientation, fastening method, and access for cables and tools. The machine frame must remain rigid under the rotary load.

Review the environment for coolant, dust, chips, washdown, and heat. Ask whether the sealing, lubrication, and protection level match the real operating conditions. Plan enough space to inspect the bearing area, remove the fixture, and route cables without disassembling adjacent stations.

Validate the Complete Rotary Axis

Before ordering, build a selection checklist: station count and angles, payload and center of gravity, radial and axial loads, moment, required repeatability, bore size, ratio, motor type, mounting orientation, cycle time, and environmental protection. Then validate the design with representative tooling and a documented positioning test.

QIANGDELI can help match the hollow rotary table model, bore, ratio, and motor interface to a multi-station automation concept. Review the QIANGDELI hollow rotary table range or send the required payload, rotation speed, load direction, mounting style, and station layout to request a configuration and quotation.

CTA: Explore QIANGDELI hollow rotary tables or request a rotary table quotation.